Getting outdoors has never been more popular, due in part to two years trapped in isolation during the pandemic. If you’re looking to add more glitz and glam to your camping experience, then a bell tent is a great option!

60mm thick high-density foam with removable/washable fabric cover(65mm and 70mm thick for option)

Step 1: Design The Platform Before anything else, you’ll need to design your tent platform and decide where you want to place it. Choose a level spot that has good drainage and excellent views.

Step 2: Make The Leg Posts The leg posts are the bedrock of your platform. They raise the platform off the ground and allow for proper drainage.

Canvas are usually divided into two categories: coarse canvas and fine canvas. Coarse canvas, also known as canopy cloth, has good waterproof performance and is used for automobile transportation and open-air warehouse cover and tents in the field.

Step 5: Attach The Center Beam The center beam is essential for reinforcing your platform, so it doesn’t bow in the middle. It will run horizontally through the middle of your platform.

Size (Open)：48" wide x 83" long x 49" high(123x210x126cm)； Size (Sleeping)：48" wide x 83" long(123x210cm)； Size (Closed)：48’’ wide x 41’’ long x11’’ high(125x112x28cm)

Canvas (canvas) is a thicker cotton or linen fabric. Named because it was originally used for sails. Generally, plain weave is used, and a small amount of twill weave is used. Multi-strand yarn is used for warp and weft.

Starting with unfolding your tent and aggressively shaking it to remove as much dust as possible and then lay the unfurled tent on a clean surface.

Not all of the options below will suit all campers. There are many factors to consider – capacity/storage requirements, vehicle specifications, included gear, camping preferences and more.

Pop Up Roof Tent is a 2 person tent, the entrance is covered. The model works well on shorter car(less than 180cm) and Trailer. It’s a very light roof top tent, only 45kg.

One of the basic items needed to prepare for cold weather is a sleeping bag suitable for various conditions. A temperature level of 15 degrees or lower is the lowest temperature that allows you to keep a warm sleeping bag. Anything above this temperature

By choosing a wedge shape instead of a tent that is raised at the tip and tail, you can reduce weight and complexity. Wedge-shaped tents only need to lift the pillars at one end.

The cold weather cover is made of aluminum-coated rainproof material, which can reflect extremely cold air and help maintain the body temperature in the tent. Our cold weather cover uses heavy-duty elastic bands and grommets to fit around the corners, and

These premium bell tents are made of high-quality cotton canvas, sturdy frames, metal center poles, and some are even built for year-round living!

Step 2: Make The Leg Posts The leg posts are the bedrock of your platform. They raise the platform off the ground and allow for proper drainage.

An important tip to prevent condensation on the roof tent is to always keep at least one window of the tent open or slightly open. At least enough to let fresh air flow through the tent. This is recommended even if it is cold outside.

Accessory channels on 4 sides for connecting awnings, recovery equipment, etc. (up to 50 pounds per side), and an optional set of crossbars for carrying bicycles, kayaks, snowboards or whatever you need for your adventure Other items.

Find our handy list of best car top tent options– see our full roof top camper reviews further below.

How to Retreat a Canvas Tent Make sure the canvas is dry and clean.